Technical Support

Analysis method of vanadium pentoxide

Wage sample 0.1g (weigh to 0.0001g) in 300ml triangular conical flask, add 1:1 sulfuric acid 5ml, add a little steaming water, heat and dissolve, take off, add 3:1: 1 sulfur phosphate 15 ml, drops of 10% ammonium ferrous sulfate solution to a green, cool to room temperature in cold water with 3% potassium permanganate oxidation to solution is slightly red don’t disappear, then add about 1 gram of solid urea with 1% sodium nitrite is original to solution is [...]

Preparation of hexagonal flake nano magnesium hydroxide materials

Magnesium hydroxide is a kind of green, low-cost and environment-friendly inorganic additive flame retardant. It has the advantages of good thermal stability and non-toxicity. It can be widely added to polymer materials such as plastics, rubber and coatings to improve their flame retardant properties. However, the hexagonal flake-like nanometer magnesium hydroxide material with small particle size and low surface polarity has good dispersibility and nanometer activity. In the case of almost no impact on the use of strength, can [...]

Preparation of high purity praseodymium chloride anhydrous by programmed temperature rise method

The purpose of the invention is to provide a program speed temperature control the preparation of high purity anhydrous praseodymium chloride or neodymium chloride, the method in the industrial scale of high purity anhydrous praseodymium chloride or neodymium chloride products, including water content is less than 0. 1%, the product is added to water dissolved immediately, dissolved after solution clear transparent, product purity is more than 99%, the yield more than 99%. Technical solutions will directly out of the [...]

Applications of Titanium Silicide Carbide Ti3SiC2 layered ceramic materials

(1) biomedical applications In dentistry, materials or components used in the oral environment are required to withstand oxidation for a long time. Maintain stability, but also need to have good machinability and plasticity. Ti3SiC2 is an existing ceramic material It has metal properties and good biocompatibility, which makes it possible to be used in human body. Ti3SiC2 can be machined to precisely sized threads and can be made into implants without lubricant Or prosthesis and so on in oral medicine clinical application. Elastic [...]

What is the preparation method of Ammonium paratungstate

The molecular formula of APT crystallization is 5(NH4)2O·12WO3·nH2O(n=5, 7, 11), and its solubility in water is very small, which increases slightly with the rise of temperature. Ammonium secondary tungstate crystallization is the main intermediate product for the preparation of blue tungsten oxide, ammonium tungsten bronze and tungsten powder, and its morphological structure greatly affects the morphology and properties of tungsten products. The particle size and loose packing density of tungsten products are dependent on the raw material ammonium secondary [...]

The invention relates to a preparation method and a process of ammonium fluotitanate

Ammonium fluotitanate, also known as ammonium hexafluorotitanate, is commonly used in ceramics and glass as an anti-corrosive cleaner and in the manufacture of artificial gems; In addition, it can also be used to synthesize the titanium oxide precursor with special morphology. Ammonium fluoride titanate powder is stable at room temperature and insoluble in water. In the existing preparation methods of ammonium fluoride, the raw materials used are usually more complex, the cost is higher, and the preparation method is [...]

Vanadium carbide and its preparation method and process

Vanadium carbide, black crystal, density 5.25-5.4 black crystal, melting point 2750℃, slightly harder than quartz. Mainly used in the manufacture of vanadium steel, can also be used as carbide carbide additive. Can be used in structural steel, tool steel, pipe steel, rebar, ordinary engineering steel and cast iron. The research shows that adding vanadium carbide to steel can improve the comprehensive mechanical properties of steel, such as wear resistance, corrosion resistance, toughness, strength, ductility and hardness as well as [...]

The process control of the crystallization of ammonium dimolybdate and the process conditions for the formation of single crystal

Ammonium molybdate is a typical homopolybdate with many types, mainly including ammonium dimolybdate, ammonium tetramolybdate, ammonium heptamolybdate, ammonium ocmolybdate, ammonium dodecolybdate and ammonium tetramolybdate. Ammonium molybdate used in the industry is mostly the mixture of the above ammonium molybdate in different proportions, which is easy to be hygroscopic and agglomerated, and not easy to disperse. Ammonium molybdate is the main raw material for preparation of molybdenum-based products, especially molybdenum powder. Its phase purity and chemical and physical properties have [...]

Preparation of tungsten chloride

This procedure is exactly the same as the preparation of tungsten tetrachloride, but the product cannot contact with air due to its strong hygroscopicity, so it should be fully dried and preserved. Under this reaction condition, there is no protective atmosphere, so it is difficult to ensure that tungsten pentachloride is not decomposed. During refining, the product is put into a hard glass tube and placed in the air of vacuum or nitrogen and carbon dioxide. The glass tube [...]

Preparation and application of titanium nitride

The chemical properties of nitrogen element are very stable, but under some special conditions, it can form nitrides with many elements. Among these nitrides, the transition metal nitrides — Titanium nitride (TiN) has become the focus of research at home and abroad. Titanium nitride is a small wet structural material with attractive gold color, high melting point, high hardness, good chemical stability, and metal, and has high conductivity and superconductivity. It can be used in high temperature structural materials [...]