Bil2Ti020 material was prepared by solution hydrothermal method. Crystals with graded structure such as micron ball, micron flower, nanorod and nanowire were synthesized. For controllable morphology, this paper analyzes the reaction temperature, reaction time, pH and PVA concentration on Bil2Ti020 morphology and structure, the [...]
Rhenium itself has no independent deposit, and is often dispersed in other non-ferrous ore bodies. It is mainly associated with molybdenite and mostly occurs in trace minerals such as molybdenum, copper, lead, zinc, platinum and niobium. Therefore, we should make full use of regional [...]
Preparation of Ruthenium trichloride directly from ruthenium-containing waste material Ruthenium trichloride is one of the most important compounds of ruthenium and is an important chemical raw material in the fields of heterogeneous catalysis, homogeneous catalysis, electroplating, coating and so on. A method of preparing [...]
Strontium isotope ratio (87Sr/86Sr) is widely used in the fields of earth science, astrochemistry, environmental chemistry, food origin traceability, archaeology and so on. Thermoionization mass spectrometers (TIMS) have been regarded as the benchmark technique for 87Sr/86Sr ratio analysis since the 1960s. This method not [...]
Also a kind of inorganic metal tungsten compound, ammonium paratungstate and ammonium metatungstate have certain differences in performance, production technology and application. First, the former is insoluble in water, the latter is easily soluble in water, and the aqueous solution is quite stable; Second, [...]
Although the current use of holmium and erbium is still limited, some are equal to people’s further development, but it is certain that, with the development of science and technology, the application of holmium and erbium will be more and more widely, more and [...]
Sodium pyrophosphate reacts with copper sulfate or copper chloride to produce copper pyrophosphate.
Na4P207+2CuS04 Cu2P207+2Na2S04
Na4P207+ 2cucL2-Cu2p207 +4NaCl
Sodium pyrophosphate (95%) 950
Copper sulfate (93%) 1450
Using industrial hydrated disodium phosphate as raw material, it is heated and dehydrated at low temperature, and then slowly heated to about 100℃, [...]
Lubricating oil is a common lubricating material, which can reduce equipment wear and tear, prolong equipment service life and reduce maintenance cost. Lubricating oil is composed of different types of base oils and various additives with different properties, among which additives can make up [...]
1. Hydrothermal synthesis method in the closed reactor, the 4∶1(molar ratio) molybdic acid and laurel gum reaction to molybdic acid molecules on the technology of amine, reaction temperature is 150℃, time is 1 day, at this time the light yellow molybdic amine compound turned [...]
Aluminum nitride (AlN) is a kind of advanced ceramic material with excellent comprehensive performance. It is a kind of new packaging material which is favored by domestic and foreign experts. It is also recognized as the most promising high thermal conductivity ceramic material at [...]