Imidodisulfuryl fluoride lithium salt
Other name: Lithium bis(fluorosulfonyl)imide
CAS: 171611-11-3
Imidodisulfuryl fluoride lithium salt (LiFSI) can be used as the next generation of secondary lithium ion battery electrolyte lithium salt to replace lithium hexafluorophosphate because of its high stability (not decomposed below 200℃), excellent low temperature performance, good hydrolysis stability and more friendly environment.
- 描述
- Inquiry
Molecular formula: F2LiNO4S2
Relative molecular weight: 187.072
Appearance (20°C) : Crystal powder Color: white Very light yellow Melting point: 133°C (decomposition)
Product use
Lithium fluoride sulfonimide salt can be used as a lithium ion battery electrolyte additive, applied in the electrolyte of rechargeable lithium battery, can effectively reduce the high and low temperature resistance of SEI layer formed on the surface of the electrode plate at low temperature, reduce the capacity loss of lithium battery in the process of placement, so as to improve the battery capacity and electrochemical performance of the battery, can also be used as a battery electrolyte; Can be used as polymerization catalyst; It can also be used as an antistatic agent in the industrial field.
LIFSI, its predecessor LiPF6, is the most widely used solute lithium salt for lithium batteries commercially, but LiPF6 has problems such as poor thermal stability and easy hydrolysis, which is easy to cause rapid attenuation of battery capacity and bring safety risks. The new electrolyte solute lithium salt LiFSI has much better physical and chemical properties than LiPF6:
Higher thermal stability – LiFSI melting point is 145℃, decomposition temperature is higher than 200℃; Better electrical conductivity;
Better thermodynamic stability – the LiFSI electrolyte has good compatibility with the two main components of the SEI film, and only some of its components will be replaced at 160 ° C.
相关产品
-
Aluminum lithium tetrachloride
Other name: Lithium Aluminum Tetrachloride; Lithium tetrachloroaluminate; lithium tetrachloroaluminum; Lithium chloroaluminate (6CI); Aluminum lithium chloride (AlLiCl4)
CAS no. : 14024-11-4
EINECS no. : 237-850-9
Formula: LiAlCl4
Molecular weight: 175.7345
Chemical properties: Water or moisture absorption decomposition
Appearance: White or off-white powder
-
Lithium Iodide Trihydrate
CAS no. : 7790-22-9
Molecular formula: H6ILiO3
Molecular weight: 187.8913
Melting point: 73 ℃
-
Cesium tungstate
English alias: Cesium tungsten oxide (Cs2WO4); Cesium tungstate. Dicesium tungsten tetraoxide; Dicesium; Oxygen anion (2); Tungsten; Dicaesium dioxido (dioxo) tungsten
CAS no. : 13587-19-4
EINECS no. : 237-019-0
Molecular formula: Cs2O4W
Molecular weight: 513.6485
-
Rubidium hydroxide
CAS no. : 1310-82-3
EINECS no. : 215-186-0
Molecular formula: HORb
Molecular weight: 102.4751
Boiling point: 100 °C at 760 mmHg
Solubility in water, soluble
Vapor pressure: 24.5 mmHg at 25 °C
-
Sodium hexafluoroantimonate
Other name: Sodium hexafluoroantimonate(V); ; 1,4-dibromo-2-chloro-1,1-difluorobutane; sodium antimony hexafluoride; sodium hexafluoroantimonate(1-)
CAS Number: 16925-25-0
EINECS number: 240-989-8
Molecular formula: F6NaSb
Molecular weight: 258.7402
-
Rubidium fluoride
Other name: Rubidium monofluoride
CAS no. : 13446-74-7
EINECS no. : 236-603-2
Molecular formula: FRb
Molecular weight: 104.4662
Melting point (℃) : 775.
The boiling point (℃) : 1410.
Relative density (water =1) : 3.56.
The saturation vapor pressure (kPa) : 0.13 (920 ℃).
Solubility: soluble in water, insoluble in ethanol, ether, liquid ammonia, soluble in hydrofluoric acid.
-
Rubidium Stearate
-
Rubidium chromate
Other name: dirubidium dioxido(dioxo)chromium
CAS Number: 13446-72-5
EINECS number: 236-601-1
Molecular formula: CrO4Rb2
Molecular Weight: 286.9293
Density: 3.518
Appearance: Yellow crystal powder
Chemical properties: Soluble in water, its aqueous solution is alkaline.
-
Potassium Sodium Titanate
KNaTiO3
Sodium potassium titanate is a new additive, the product uses a special process to completely solve the problem of easy absorption of potassium titanate products. Potassium titanate can reduce the arc voltage, stabilize the arc, reduce the splash, the use of superior performance, fine weld. Can be widely used in low hydrogen electrode, AC and DC electrode, and stainless steel electrode and flux cored wire
-
Sodium bismuth titanate
Molecular composition:
Na0.5Bi4.5Ti4O15 or Na0.5Bi(4.5-x)Ce(x)Ti4O15Bismuth sodium titanate (BNT) is A-site complex ion perovskite ferroelectric. At room temperature, it belongs to the tripartite crystal system, and the Curie temperature is 320℃. It has excellent characteristics such as strong ferroelectricity, small piezoelectric constant and dielectric constant, good acoustic performance, and low sintering, and is considered to be the most attractive lead-free piezoelectric ceramic material.