Lithium cobalt phosphate
Other name: Phosphoric acid lithium cobalt
LiCoPO4
Form: powder, target material
Purity: 3N
Lithium battery anode material
Lithium cobalt phosphate powder/target material is the anode material of new lithium battery, with high capacity, good cycling performance, voltage platform of 4.8v and good safety
- 描述
- Inquiry
The working voltage of lithium cobalt phosphate material can reach 4.8v and the capacity can reach 170mAh/g. It has the same crystal structure as lithium iron phosphate, both of which are ordered peridotite structure and belong to orthogonal crystal system, the space group is Pmnb, and the crystal cell parameters are a=0.5922nm, b=1.0202nm and c=0.4699nm. In the crystal, O atoms are hexagonal dense, P atoms occupy tetrahedral gaps, and Li and Co atoms occupy octahedral gaps. CoO6, an octahedron with common edge, is linked to PO4 tetrahedron in the direction of C axis to form a chain. Because the co-o-p bond stabilizes the crystal structure, the crystal rearrangement is very small and the crystal structure is very stable in the process of charging and discharging, which also guarantees the good cycling performance of cobalt phosphate material. Especially in some fields requiring long-term storage, such as distributed energy storage, energy storage batteries need long-term floating charge of small current, which will lead to excessive release of Li+ and damage the structure of positive electrode materials. As for phosphate materials, due to their stable structure, even in the long-term process of small current floating charge, Li+ excessive release, phosphate materials still have good stability and resistance to floating charge. However, the CoO6 octahedron is not directly connected, but is connected by a tetrahedral PO4, so it cannot form a continuous co-o-co structure like lithium cobalt oxide material. Therefore, the conductivity of lithium cobalt phosphate material is very poor, affecting the discharge performance of the material with large current. The discharge mechanism of lithium cobalt phosphate material is relatively complex. According to the research of n.n.ramnik et al., the charging process of lithium cobalt phosphate is mainly divided into two steps:
The synthesis method of lithium cobalt phosphate is similar to that of lithium iron phosphate, including solid phase method, sol-gel method, hydrothermal method, microwave method and spray drying pyrolysis method. The solid phase method is the most simple method, which requires less equipment and is suitable for large-scale industrial production. However, the heat treatment temperature is high, the energy consumption is high, the particle size distribution range of the material is wide, the material batch stability is poor. Sol-gel method can make the raw materials to reach the molecular level of mixing, can effectively reduce the heat treatment temperature and time, the material particle size is small, and the particle size distribution is uniform. However, the raw material cost of sol-gel method is high, and the shrinkage rate of body volume in the heat treatment process is high, so the production efficiency is low. Hydrothermal method is a powerful method to synthesize nanomaterials, which has the advantages of low reaction temperature, low energy consumption, high purity and small particle size. However, hydrothermal method has high requirements on equipment and low production efficiency, so it is not suitable for large-scale industrial production. Spray thermal decomposition method requires relatively simple equipment, can be continuous production, production cost is low. However, due to the low crystallinity of the material, it is necessary to conduct subsequent heat treatment on the material to improve its performance.
Phosphoric acid lithium cobalt materials, not only inherited the lithium iron phosphate material good security, good cycle stability, resistance to the advantages of small current floating voltage, also greatly improved the material working voltage of 4.8 V, the energy density of the material reached 800 wh/kg, electrolyte and ceramic coatings with high voltage diaphragm use, can get a high energy density and high security of lithium ion battery. We believe that with the progress of production technology, it will be widely used in electric vehicles, distributed energy storage and other fields.
相关产品
-
Aluminum lithium tetrachloride
Other name: Lithium Aluminum Tetrachloride; Lithium tetrachloroaluminate; lithium tetrachloroaluminum; Lithium chloroaluminate (6CI); Aluminum lithium chloride (AlLiCl4)
CAS no. : 14024-11-4
EINECS no. : 237-850-9
Formula: LiAlCl4
Molecular weight: 175.7345
Chemical properties: Water or moisture absorption decomposition
Appearance: White or off-white powder
-
Cesium chromate powder
Other name: Dicaesium dioxido(dioxo)chromium
CAS no. : 56320-90-2
EINECS no. : 236-640-4
Molecular formula: CrCs2O4
Molecular weight: 381.8046
Density: 4.237 g/mL
-
Lithium lanthanum titanate
Li (x) La (2/3-x) TiO3
Purity: 4N
We can supply ( LLT ) powder and target material, welcome contact us!
This material used in lithium battery solid electrolyte, ion conductivity superior performance, is the direction of development of lithium batteries.
-
Cesium carbonate
Other name: Cesium carbonate anhydrous; caesium carbonate
CAS no. : 534-17-8
EINECS no. : 208-591-9
Molecular formula: Cs2CO3
Molecular weight: 325.82
Density: 4.072
Melting point: 610 ℃ (dec)
Solubility in water: 261 g / 100 mL (20 ℃)
-
Potassium Silicate Titanate
Name: Potassium Silicate Titanate
Other name: Fused Potassium Silico-Titanate
-
Cesium iodide
Other name: caesium iodide
CAS no. : 7789-17-5
EINECS no. : 232-145-2
Molecular formula: CsI
Molecular weight: 259.8099
Melting point: 626 ℃
Boiling point: 127 ° C at 760 mmHg
Solubility in water: 74 g / 100 mL (20 ℃)
Vapor pressure: 13.8 mmHg at 25 ° C
-
Caesium fluoride
Other name: Cesium fluoride
CAS no. : 13400-13-0
EINECS no. : 236-487-3
Molecular formula: CsF
Molecular weight: 151.9039
Melting point: 682℃
Boiling point: 19.5 ° C at 760 mmHg
Solubility in water: 369 g / 100 mL (18℃)
The vapor pressure, 922 MMHG at 25°C
-
Rubidium Stearate
-
Rubidium chromate
Other name: dirubidium dioxido(dioxo)chromium
CAS Number: 13446-72-5
EINECS number: 236-601-1
Molecular formula: CrO4Rb2
Molecular Weight: 286.9293
Density: 3.518
Appearance: Yellow crystal powder
Chemical properties: Soluble in water, its aqueous solution is alkaline.
-
Lithium Iso Propoxide
Other name: Lithium isopropoxide; lithium propan-2-olate
CAS no. : 2388-10-5
Formula: C3H7LiO
Molecular weight: 66.0281
Boiling point: 73 ° C at 760 mmHg
Flash: 11.7 ° C
Vapor pressure: 81.3 mmHg at 25 ° C
Properties: water absorption decomposition, soluble in alcohol, benzene, tetrahydrofuran and other organic solvents.