Lithium vanadium phosphate LVP
C 5%-Li3V2( PO4 )3
Carbon coated lithium vanadium phosphate (5%C-LVP) lithium battery anode material, strong ionic conductivity, high capacity, high voltage platform, good safety.
Need to customized production.
- 描述
- Inquiry
Lithium vanadium phosphate is a kind of polyanionic anode material, which has the advantages of good stability, high safety, high theoretical capacity, high operating voltage and low price.
Lithium vanadium phosphate is a monoclinic structure compound with a higher positive lithium ion diffusion system and a higher discharge voltage (3.6/4.1V). At the same time, due to the addition of carbon in the lithium vanadium phosphate complex, the overall energy density and safety are high, which can not only exclude the shortcomings of lithium cobalt acid and lithium iron phosphate, but also improve the electrical conductivity [1]. However, vanadium material has the disadvantages of difficult extraction of precursor, high energy loss and high toxicity, so it is very important to analyze the application of graphene in the preparation of lithium vanadium phosphate for lithium ion batteries.
Lithium vanadium phosphate cationic and anion doping
On the one hand, the lithium vanadium phosphate/graphene complex crystal is a three-dimensional framework, which mainly includes phosphate tetrahedron and octahedron. Since lithium ions can be freely diffused within the crystal during the charge and discharge process, in order to ensure the electrochemical performance of lithium vanadium phosphate/graphene, the lithium ion diffusion channel in lithium vanadium phosphate materials can be further expanded by adjusting the number of cations or anions of lithium vanadium phosphate/graphene. The commonly used lithium vanadium phosphate/graphene modified cations are mainly manganese ions, barium ions, chromium ions and antimony ions. Taking chromium ion doping modification as an example, lithium carbonate, chromium acetate, ammonium hydrogen phosphate and ammonium metavanadate can be weighed according to the measurement ratio of house type in previous experiments. The mixture is then incorporated into 80mL of deionized water and the acid saturated solution is gradually added. After full stirring, adjust the pH to 7.0 with ammonia. The mixture was then placed in a water bath heated stirring instrument (80°C/3.5h) and an oven (80°C/10h). The modified material is cooled to room temperature in argon and then ground. By adjusting the proportion of chromium acetate, it can be concluded that with the increase of the proportion of chromium acetate, the diffraction peak crystal plane spacing of lithium vanadium phosphate material increases gradually, indicating that the material modification is successful. On the other hand, in the anionic doping of lithium vanadium phosphate/graphene, the main doped materials are chloride ions, fluorine ions and boric acid ions. Taking the addition of chloride ions as an example, the materials of lithium chloride, ammonium hydrogen phosphate, lithium carbonate and ammonium metavanadate can be classified according to the stoichiometric ratio.
相关产品
-
Lithium lanthanum titanate
Li (x) La (2/3-x) TiO3
Purity: 4N
We can supply ( LLT ) powder and target material, welcome contact us!
This material used in lithium battery solid electrolyte, ion conductivity superior performance, is the direction of development of lithium batteries.
-
Cesium chromate powder
Other name: Dicaesium dioxido(dioxo)chromium
CAS no. : 56320-90-2
EINECS no. : 236-640-4
Molecular formula: CrCs2O4
Molecular weight: 381.8046
Density: 4.237 g/mL
-
Cesium carbonate
Other name: Cesium carbonate anhydrous; caesium carbonate
CAS no. : 534-17-8
EINECS no. : 208-591-9
Molecular formula: Cs2CO3
Molecular weight: 325.82
Density: 4.072
Melting point: 610 ℃ (dec)
Solubility in water: 261 g / 100 mL (20 ℃)
-
Cesium iodide
Other name: caesium iodide
CAS no. : 7789-17-5
EINECS no. : 232-145-2
Molecular formula: CsI
Molecular weight: 259.8099
Melting point: 626 ℃
Boiling point: 127 ° C at 760 mmHg
Solubility in water: 74 g / 100 mL (20 ℃)
Vapor pressure: 13.8 mmHg at 25 ° C
-
dipotassium trioxotellurate powder
Other name: Potassium tellurate(IV); POTASSIUM TELLURITE; dipotassiumtrioxotellurate; telluricacid(h2teo3),dipotassiumsalt; Tellurousacid,dipotassiumsalt; dipotassium tellurite.
CAS number: 7790-58-1
EINECS number: 232-213-1
Molecular formula: K2O4Te
Molecular weight: 269.7942
Density (g / mL, 25 ° C): 3.503
Melting point (oC): 460-470
-
Rubidium Stearate
-
Rubidium hydroxide
CAS no. : 1310-82-3
EINECS no. : 215-186-0
Molecular formula: HORb
Molecular weight: 102.4751
Boiling point: 100 °C at 760 mmHg
Solubility in water, soluble
Vapor pressure: 24.5 mmHg at 25 °C
-
Sodium bismuth titanate
Molecular composition:
Na0.5Bi4.5Ti4O15 or Na0.5Bi(4.5-x)Ce(x)Ti4O15Bismuth sodium titanate (BNT) is A-site complex ion perovskite ferroelectric. At room temperature, it belongs to the tripartite crystal system, and the Curie temperature is 320℃. It has excellent characteristics such as strong ferroelectricity, small piezoelectric constant and dielectric constant, good acoustic performance, and low sintering, and is considered to be the most attractive lead-free piezoelectric ceramic material.
-
Lithium Iodide Trihydrate
CAS no. : 7790-22-9
Molecular formula: H6ILiO3
Molecular weight: 187.8913
Melting point: 73 ℃
-
Rubidium chromate
Other name: dirubidium dioxido(dioxo)chromium
CAS Number: 13446-72-5
EINECS number: 236-601-1
Molecular formula: CrO4Rb2
Molecular Weight: 286.9293
Density: 3.518
Appearance: Yellow crystal powder
Chemical properties: Soluble in water, its aqueous solution is alkaline.