Manganese silicide MnSi2
Other name: Manganese Disilicide
Chemical formula: MnSi2
Molecular weight: 111.11
Density (g/mL, 25℃) : 5.24.
Properties: Gray octahedral crystal.
Purity:99%
Particle size: 325mesh
Soluble in hydrofluoric acid, alkali, insoluble in water, nitric acid, sulfuric acid.
- 描述
- Inquiry
Manganese silicide, a transition metal silicide, is a kind of refractory intermetallic compound, because of its unique
Its physical and chemical properties have been successfully applied to Cmos components, thin film coatings,
Block structural components, heating elements, thermoelectric materials and photovoltaic materials, etc. Its nanomaterials are more
Is showing special electrical, optical, magnetic and thermoelectric properties, even in the field of catalysis
It has potential application value. Using manganese silicide kind of thermoelectric conversion materials, so as to represent the output index
The power factor reached 2.4MW /K2m, which was about twice of the original. Using materials,
It is expected to achieve the engine and industrial industrial furnace emissions of waste heat, such as 300 ~ 700℃
A high-power thermoelectric module that converts heat into electricity. However, metallurgical methods or physics
The traditional preparation methods such as the method cannot satisfy the preparation of transition metal silicide nanomaterials.
However, the manganese silicide prepared by Haixin has high alloying degree, pure metal process, high purity and low impurity.
Tohoku University announced on December 1, 2016 that using manganese silicide thermoelectric conversion materials,
As a result, the power factor representing the output index reached 2.4MW /K2m, which was about twice as much as the original one.
The use of materials is expected to achieve the engine and industrial industrial furnace emissions of waste heat such as 300 ~ 700℃
A high power thermoelectric power generation module that converts unutilized heat into electricity.
相关产品
-
Nanometer Tin oxide
English alias: Tin (IV) oxide; Tin Dioxide;
CAS no. : 18282-10-5; 1332-29-2
EINECS no. : 242-159-0; 215-569-2
Formula: SnO2
Molecular weight: 150.69
Density: 6.95
Melting point: 1127 ℃
Solubility: INSOLUBLE
-
Copper zinc tin sulfide
Other name: CZTS
Chemical formula: Cu2ZnSnS4
Molecular weight :439.471 g / mol
CAS Number:12158-89-3
Melting point: 990 ° C (1,810 ° F; 1,260 K)
Safety Description: Non-toxic
-
Nanometer Aluminum hydroxide
Other name: Alumina trihydrate; Aluminium hydrate
CAS no. : 51-21645-2
EINECS no. : 244-492-7
Molecular formula: Al(OH)3
Molecular weight: 78.0027
Melting point: 300 ℃ (lose) water
Solubility: insoluble
-
Nickelous Oxide
Other name: Nickel Oxide Green, Nickel Monoxide, Nickel protoxide
CAS no. : 1313-99-1; 11099-02-8
EINECS no. : 215-215-7
Molecular formula: NiO
Molecular weight: 74.6928
Melting point: 1960 ℃
Solubility: insoluble -
Cobalt iron oxide
Other name: Cobalt ferrite, cobalt diiron tetraoxide, dicobaltous diferric oxygen(-2) anion
CAS no. : 12052-28-7
EINECS no. : 234-992-3
Molecular formula: CoFe2O4
Molecular weight: 234.6208
-
Lithium iron phosphate
English name: Lithium iron phosphate carbon coated
Alias: Ferrous lithium phosphate, NP 1; NP 1 (phosphate); PT 30; PT 30 (phosphate); Phos-Dev 21B, Lithium iron phosphate
Molecular formula: LiFePO4
Molecular weight: 157.76
CAS NO .: 15365-14-7
-
Cuprous telluride
Other name: dicopper telluride, Cuprous monotelluride;
CAS no. : 12019-52-2
EINECS no. : 234-646-1
Molecular formula: Cu2Te
Molecular weight: 254.692
Density: 7.27g /cm3
Melting point: 900 ℃ -
Osmium Tetroxide
Other name: Osmium(VIII) oxide; tetraoxoosmium; Osmium oxide
CAS no. : 20816-12-0
EINECS no. : 244-058-7
Molecular formula: O4Os
Molecular weight: 254.2276
Melting point (℃) : 41.0
Relative density (water =1) : 4.91
Boiling point (℃) : 130
Saturated vapor pressure (kPa) : 0.93/20 ℃
-
Nickel cobalt manganese
-
Manganese ferrite
Other name: Manganese Ferrite Black ,manganese ferrite black spinel
CAS no. : 68186-94-7
EINECS no. : 269-056-3
Molecular formula: MnFe2O4
Molecular weight: 230.63