Stannum Titanium Carbide Ti2SnC
Purity: 99%
Particle size: 325 mesh
Chemical composition:
Ti 42.2% C 5.3% Sn 52.2%
Other impurity: 0.3%
Ti2SnC is a new type of structure ceramic which can be machined and has special layer structure.
- 描述
- Inquiry
Ti2SnC combines the advantages of both metals and ceramics: like metals, it conducts electricity well
Thermal conductivity, machinability, high damage tolerance and thermal shock resistance, etc. Similar to ceramics,
It has high elastic modulus, high temperature resistance, oxidation resistance and corrosion resistance and other excellent properties.
Based on the above advantages, Ti2SnC ceramics may be widely used as matrix or reinforcer
Used in aviation, aerospace, weapons and equipment, nuclear industry, electronic information and other high-tech fields.
Although Ti2SnC ceramics have excellent comprehensive properties and a wide range of application prospects, but the material of
The preparation is difficult and the purity is difficult to control, so the application of Ti3SnC2 ceramics is limited.
As described in the literature (J. Am. Ceram. Soc. 96, No. 10, 2013), it was adopted
Fe is the sintering assistant. The element mixture powder is hot-pressed at 1150 °C and 50mpa for 10h.
Ti3SnC2 ceramics containing FexSny, Sn and TiC were obtained. References (J. Am. Ceram. Soc.
As described in 99, No.7, 2016), Ti, Sn and graphite are used as raw materials in an atmosphere of argon
The Ti2SnC ceramics containing Sn and TiC impurities were sintered in a tube furnace at 1600 °C for 4 h.
The preparation method mentioned above has a long sintering time and produces impurity phases TiC and FexSny
It is difficult to remove and has a very adverse effect on the properties of Ti2SnC ceramics. Therefore, high purity is prepared
Ti2SnC ceramics is of great significance for the wide application of this material.
相关产品
-
Tin zinc oxide nano powder
English alias: Zinc Stannate; zinc oxostannanediolate
CAS no. : 12036-37-2
Molecular formula: O3SnZn
Molecular weight: 232.1172
-
Zinc telluride
Other name: tellanylidenezinc
CAS no. : 1315-11-3
EINECS no. : 215-260-2
Formula: TeZn.
Molecular weight: 193.009
Melting point is 1238.5 ℃
Density: 6.34 g/Ml at 25 ℃
-
Metastannic acid
CAS no. : 13472-47-4
EINECS no. : 236-236-5
Formula: H2SnO3
Molecular weight: 168.59
Character: iso-isomer, insoluble in water and ethanol, insoluble acid and alkali liquor, can be fused with alkali to obtain partial tin acid salt, heating significant water loss.
-
Cuprous telluride
Other name: dicopper telluride, Cuprous monotelluride;
CAS no. : 12019-52-2
EINECS no. : 234-646-1
Molecular formula: Cu2Te
Molecular weight: 254.692
Density: 7.27g /cm3
Melting point: 900 ℃ -
Aluminum Nitride micron and nano powder
-
Cobalt iron oxide
Other name: Cobalt ferrite, cobalt diiron tetraoxide, dicobaltous diferric oxygen(-2) anion
CAS no. : 12052-28-7
EINECS no. : 234-992-3
Molecular formula: CoFe2O4
Molecular weight: 234.6208
-
Manganese ferrite
Other name: Manganese Ferrite Black ,manganese ferrite black spinel
CAS no. : 68186-94-7
EINECS no. : 269-056-3
Molecular formula: MnFe2O4
Molecular weight: 230.63
-
Stannic Sulfide
Other name: tin monosulfide, tin(ii) sulfide, Tin sulphide; thioxostannane
Chemical formula: SnS
Molecular weight:150.775
CAS number: 1314-95-0
EINECS: 215-248-7
Melting point : 880 ℃
Boiling point: 1230 ℃
Water: insolubility
Density: relative density 5.22
Molality: 150.775 g/mol g·mol⁻¹
-
Nickel cobalt manganese
-
Nickelous Oxide
Other name: Nickel Oxide Green, Nickel Monoxide, Nickel protoxide
CAS no. : 1313-99-1; 11099-02-8
EINECS no. : 215-215-7
Molecular formula: NiO
Molecular weight: 74.6928
Melting point: 1960 ℃
Solubility: insoluble