Articles

The first and second generation of lithium titanate

Lithium titanate: the ill-fated first generation of quick-charge batteries Under this background, micromacro enters the “quick charging stage”. “” in 2010, we launched the LpTO lithium titanate battery, officially launched the quick charge technology route and applied in chongqing bus.” ” “For the fixed line between A and B, the quick charge operation mode is to set charging station at point A or A and B simultaneously. The battery capacity of the vehicle does not need to be large, and [...]

Industrial grade lithium carbonate, salt lake purification method

Lithium carbonate, an inorganic compound whose chemical formula is Li2CO3, is a colorless monoclinic crystal or white powder. The density of 2.11 g/cm3. Melting point 618 ℃ (1.013 * 10 ^ 5 pa). Dissolved in dilute acid. Slightly soluble in water, solubility in cold water is greater than under hot water. Insoluble in alcohol and acetone. Can be used to produce ceramics, drugs, catalysts, etc. Common lithium ion battery material. There are several methods to extract lithium from salt lake [...]

Detailed comparison of lithium titanate and other lithium battery materials

As far as the development status of new energy vehicles in China is concerned, there are various kinds of batteries, including lithium iron phosphate battery, lithium ternary material battery, lithium cobalt acid, manganese acid lithium and lithium titanate battery. In these five major battery forms, the most concerned indicators in the market focus on four aspects: safety, cycle life, wide temperature tolerance, rapid charging and discharging, which actually corresponds to the core interests of users: safety red line, operation [...]

The main application range of potassium titanate

Potassium titanate is a chemical component that can be widely used in low-hydrogen electrodes, cross-flow electrodes and stainless steel electrodes; Potassium titanate has superior properties to glass fiber and graphite fiber, and its application range has been continuously expanded since it was promoted to the public for more than a decade. As an emerging alternative to metals, it can produce smaller and lighter parts than traditional mechanical metals, meeting the needs of today’s times, and can also be used to [...]

Vanadium dioxide – a revolutionary material for future electronics industry

Geneva, Feb. 15 (xinhua) — vanadium dioxide is an ideal choice to replace silicon for a new generation of low-power electronic devices due to its unique properties. Swiss researchers have demonstrated the potential of using vanadium dioxide in aerospace communications (600677) systems to enable programmable radio frequency electronics. Vanadium dioxide has phase change characteristics, and its shape can be changed between insulator and metal. It is an insulator at room temperature and a metal conductor above 68 degrees Celsius. This [...]

The study found that vanadium dioxide ultra low thermal conductivity, “break” the laws of physics

Recently, a scientific study led by Wu Junqiao of the American Chinese Science Prize found that vanadium dioxide material in the conductive, the heat generated is very small, much lower than the Weidmann – Franz law is expected to break the classic laws of physics. The scientific discovery, published in the January 27 issue of Science, will bring a wider range of applications, such as a thermoelectric system that converts waste heat from engines and equipment into electrical energy. Weidman [...]

Research status of strontium titanate

Currently, various electronic instruments, home audio and video equipment and microcomputer, etc., in order to prevent the equipment from the external power supply cord, transmission of noise and signal lines or air surge voltage, as well as the human body electrostatic factors lead to wrong operation or semiconductor devices are broken down, is the use of ZnO varistor for protection. However ZnO varistor is purely resistive element, although has good pressure sensitive features, but because of the small dielectric constant, [...]

Preparation and properties of lanthanum zirconate and thermal barrier coatings

Thermal barrier coating is the most advanced high temperature alloy surface protective coating technology. It is widely used in aviation, aerospace, automobile and large thermal power generation industries. Especially with the gas turbine/aircraft engine towards the direction of high efficient development, on the performance of the ceramic material demand is higher and higher, traditional Y2O3 stable ZrO2 (YSZ) material is hard to meet the demand of high performance, study can replace YSZ used in high temperature thermal barrier coating [...]

Material Properties and Application of Gallium Nitride

Material properties GaN is a very stable compound, but also a hard high melting point material, the melting point of about 1700 ℃, GaN has a high degree of ionization, in the Ⅲ-Ⅴ compounds is the highest (0.5 or 0.43). At atmospheric pressure, GaN crystals are generally hexagonal wurtzite structures. It has 4 atoms in a cell, and the atomic volume is about half that of GaAs. Because of its high hardness, but also a good coating protection materials. Chemical properties At [...]

Morita Chemical plans to build a new lithium hexafluorophosphate plant in China

Recently, Japan’s Morita Chemical said the company plans to 2018 its factory in China’s lithium hexafluorophosphate production capacity increased to 7,500 tons / year, an increase of 5 percent. In addition, Morita Chemical also plans to build a new plant for lithium hexafluorophosphate in Taixing City, Jiangsu Province. Matsuda New Energy Materials (Zhangjiagang) Co., Ltd. is located in Zhangjiagang City, Jiangsu Province. It is jointly funded by Sumitomo Chemical Co., Ltd. and Sumitomo Corporation and Sumitomo Corporation (China) Co., Ltd. [...]